HP 6080 Maintenance & Service Guide: HP Compaq 6000 and 6080 Pro Business - Page 94
Power Supply
View all HP 6080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Power Supply 1. Prepare the computer for disassembly (Preparation for Disassembly on page 47). 2. Remove the access panel (Access Panel on page 48). 3. Disconnect all power cables from the drives and from the system board. 4. Remove the four silver T15 screws that connect the power supply to the chassis. 5. Press the tab on the base pan in front of the power supply that holds it in place. 6. Slide the power supply toward the front of the computer, rotate toward the fan so the power supply clears the lip on the top of the chassis, and then lift the power supply out of the chassis. To install the power supply, reverse the removal procedure. 84 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
Power Supply
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
47
).
2.
Remove the access panel (
Access Panel
on page
48
).
3.
Disconnect all power cables from the drives and from the system board.
4.
Remove the four silver T15 screws that connect the power supply to the chassis.
5.
Press the tab on the base pan in front of the power supply that holds it in place.
6.
Slide the power supply toward the front of the computer, rotate toward the fan so the power
supply clears the lip on the top of the chassis, and then lift the power supply out of the chassis.
To install the power supply, reverse the removal procedure.
84
Chapter 7
Removal and Replacement Procedures Microtower (MT) Chassis