HP 6125XLG R2306-HP 6125XLG Blade Switch EVB Command Reference
HP 6125XLG Manual
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6125XLG manual content summary:
- HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 1
HP 6125XLG Blade Switch EVB Command Reference Part number: 5998-3743 Software version: Release 2306 Document version: 6W100-20130912 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 2
, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 3
commands 1 description 1 display evb cdcp 1 display evb evb-tlv 2 display evb s-channel 4 display evb summary 5 display evb vsi 5 display interface s-channel 7 evb default interface s-channel 19 Support and other resources 21 Contacting HP 21 Subscription service 21 Related information - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 4
commands description Use description to configure a description for an interface. Use undo description to restore the default. Syntax description text undo description Default The default description for an interface is "interface name Interface." For example, the default -number ] Views Any view 1 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 5
, , , , , Table 1 Command output Field S-component capability Supported S-channel numbers per-port SVID range SCID requested from remote SCID/SVID pair list allocated Description Port-mapping S-VLAN component capability on the EVB bridge and the - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 6
number: Specifies a port by its type and number. If no interface is specified, the command displays EVB TLV negotiation information for all ports BGID status : Not supported Local RR capability : Supported Local RR status : Disabled Remote SGID status : Not supported Remote RR request status - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 7
interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Specifies a port by its type and number. If no interface is specified, the command displays S-channel information for all ports with EVB enabled - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 8
user roles network-admin network-operator Examples # Display the EVB summary. display evb summary Default manager ID: 192.168.1.1 Port number: 8080 Interface S-Channel number TGE1/0/1 2 Table 4 Command output VSI number 2 Field Default manager ID Port number Interface - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 9
Predefined user roles network-admin network-operator Parameters verbose: Displays detailed VSI information. Without this keyword, the command displays brief VSI information. interface interface-type interface-number: Specifies a port by its type and number. If no interface is specified, the command - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 10
-id.vsi-local-id ] ] [ brief [ description ] ] Views Any view Predefined user roles network-admin network-operator Parameters interface-number:channel-id: Specifies an S-channel interface. The interface-number argument specifies the physical port where the S-channel resides. The channel-id argument - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 11
type is autonegotiation PVID: 1 Port link-type: access Tagged Vlan: Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000c-29f9-366e Description: S-Channel1/0/1:10.1 Interface Last clearing of counters: Never # Display brief information about VSI S-channel 1/0/1:10.1. Assume that you have configured - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 12
complete interface description that you have configured. Assume that you have configured a description for the interface as Default VLAN ID of the interface. Link type of the interface. Encapsulation type of the trunk port. Last time the reset counters interface command - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 13
. Use undo evb default-manager to restore the default. Syntax evb default-manager { { ip ip-address | ipv6 ipv6-address | name name } [ port port-number ] | local-server } undo evb default-manager Default The default VSI manager is not specified. Views System view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 14
on a port. Views Ethernet interface view Predefined user roles network-admin Usage guidelines • After you enable EVB on the bridge port, the device cannot forward the data received from the port at Layer 3. • Do not enable EVB on a member port of an aggregation group. • Restore all default settings - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 15
-relay Default The RR mode for an S-channel is disabled. Views S-channel interface view Predefined user roles supports RR mode, the bridge automatically enables RR mode for the S-channel and adds the corresponding command line to the configuration file. You can also use this command to manually - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 16
an S-channel on a port. Syntax evb s-channel channel-id service-vlan svlan-id undo evb s-channel channel-id Default Only an automatically created default S-channel, with both SCID and SVID as 1, exists on a port with EVB enabled. Views Ethernet interface view Predefined user roles network-admin - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 17
Syntax evb vdp timer keepalive exponent value undo evb vdp timer keepalive exponent Default The VDP keepalive exponent is 20. Views Ethernet interface view Predefined user roles network-admin Parameters value: Specifies a VDP keepalive exponent in the range of 14 to 31. Usage guidelines The value - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 18
exponent to configure a VDP resource-wait-delay exponent. Use undo evb vdp timer resource-wait-delay exponent to restore the default. Syntax resource-wait-delay exponent Default The VDP resource-wait-delay exponent is 20. Views Ethernet interface view Predefined user roles network-admin Parameters - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 19
168 336 672 1343 2685 5369 10738 21475 Examples # Configure the VDP resource-wait-delay exponent for Twenty-GigabitEthernet 1/0/1 } undo evb vsi vsi-local-id Default No VSI exists on an S-channel. Views S-channel interface view Predefined user roles network-admin Parameters vsi-local-id: - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 20
manually create or delete a VSI, or modify its pre-association or association property by executing this command Default No VSI is activated. Views VSI view Predefined user roles network-admin Usage guidelines Configurations and QoS Configuration Guide. Activate a VSI after configuring a VSI filter - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 21
VSI manager. You can also manually create or remove a VSI filter by executing this command. A VSI filter contains a set of VID values (VLAN information) or a set of MAC and VID values (). Before the configuration, make sure the S-channel where you configure a VSI filter operates in trunk - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 22
:channel-id.vsi-local-id ] ] Views User view Predefined user roles network-admin Parameters interface-number:channel-id: Specifies an S-channel interface. The interface-number argument specifies an S-channel by its port. The channel-id argument specifies the number of an S-channel. This S-channel ID - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 23
number argument specifies an S-channel by its port. The channel-id argument specifies the number of an S-channel. This S-channel ID must exist. The vsi-local-id argument specifies the local number command to clear existing statistics for the interface. • If no parameters are specified, the command - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 24
Acronyms. Websites • HP.com http://www.hp.com • HP Networking http://www.hp.com/go/networking • HP manuals http://www.hp.com/support/manuals • HP download drivers and software http://www.hp.com/support/downloads • HP software depot http://www.software.hp.com • HP Education http://www.hp.com/learn 21 - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 25
Command conventions Convention Boldface Italic [ ] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * & # Description Bold text represents commands bold text. For example, the New User window appears; click OK. Multi-level or damage to hardware or software. An alert that calls - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 26
wired-WLAN switch. Represents an access point. Represents a security product, such as a firewall, a UTM, or a load-balancing or security card that is installed in a device. Represents a security card, such as a firewall card, a load-balancing card, or a NetStream card. Port numbering in examples - HP 6125XLG | R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 27
s-channel,4 display evb summary,5 display evb vsi,5 display interface s-channel,7 Documents,21 E evb default-manager,10 evb enable,10 evb mac-learning forbidden,11 evb reflective-relay,12 evb s-channel, s-channel,19 R reset counters interface s-channel,19 S Subscription service,21 W Websites,21 24
HP 6125XLG Blade Switch
EVB
Command Reference
Part number: 5998-3743
Software version: Release 2306
Document version: 6W100-20130912