HP 6125XLG R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 13
evb default-manager, evb enable, Syntax, Default, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
evb default-manager Use evb default-manager to specify the default VSI manager. Use undo evb default-manager to restore the default. Syntax evb default-manager { { ip ip-address | ipv6 ipv6-address | name name } [ port port-number ] | local-server } undo evb default-manager Default The default VSI manager is not specified. Views System view Predefined user roles network-admin Parameters ip ip-address: Specifies the IPv4 address of the default VSI manager. ipv6 ipv6-address: Specifies the IPv6 address of the default VSI manager. name name: Specifies the name of the default VSI manager, a case-insensitive string of 1 to 255 characters. port port-number: Specifies the port number of the default VSI manager, in the range of 0 to 65535. The default port number is 8080. local-server: Specifies the device as the default VSI manager. Usage guidelines When the bridge receives a VDP packet other than a De-Associate packet from a station, it contacts the VSI manager specified in the VDP packet to get VSI resources and policies for the station. The VSI manager ID TLV in a VDP packet carries the VSI manager's IP address. If the value for the TLV is all-zero, the bridge communicates with the default VSI manager specified by this command. Examples # Set the IPv4 address of the default VSI manager to 192.168.100.20. system-view [Sysname] evb default-manager ip 192.168.100.20 evb enable Use evb enable to enable EVB on a port. Use undo evb enable to disable EVB on a port. Syntax evb enable undo evb enable 10