HP 6125XLG R2306-HP 6125XLG Blade Switch EVB Command Reference - Page 7

Field Remote RR status Max ECP retry time ULPPDU retransmission exponent Resource wait-delay exponent Reinit keep-alive exponent Description Indicates whether the EVB station has enabled RR mode after EVB TLV negotiation. Maximum ECP retransmission times in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station. ECP retransmission exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station. VDP resource-wait-delay exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station. VDP keepalive exponent in this format: Local negotiation value/Remote negotiation value/Operative value. NA means no value is set on the remote EVB station. display evb s-channel Use display evb s-channel to display S-channel information. Syntax display evb s-channel [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator Parameters interface interface-type interface-number: Specifies a port by its type and number. If no interface is specified, the command displays S-channel information for all ports with EVB enabled. Examples # Display S-channel information for Twenty-GigabitEthernet 1/0/1. display evb s-channel interface TwentyGigE 1/0/1 RR status: D -- Disabled, E -- Enabled MAC learning: A -- Allowed, F -- Forbidden S-Channel interface S-Channel1/0/1:1 S-Channel1/0/1:100 SVID 1 100 Uptime yyyy/mm/dd hh:mm:ss 2012/12/17 03:43:13 2012/12/17 03:43:14 RR status D D MAC learning A A VSI number 0 2 4