HP 635n HP Jetdirect Print Servers - Administrator's Guide - Page 146
Security Settings continued, Table 8-5
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Table 8-5 Security Settings (continued) Message Description Disabled IPsec/Firewall is turned off. Policy Failed Print server failed to implement the selected IPsec policy. You might need to reset security (control panel or embedded Web server), or perform a cold reset. Admin Password IP Administrator password is set on the print server. This password is shared by Telnet, the embedded Web server, and HP Web Jetadmin to control access to print server configuration parameters. (Consists of up to 16 alphanumeric characters.) Not Specified Password not set. Set Password is set. Clear the password, using a cold reset. Cert Expires Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in UTC format (for example, "2012-10-02 12:45 UTC"). Not Applicable Digital certificate is not installed. SNMP Versions SNMP versions enabled on the print server. Disabled All SNMP versions disabled. No SNMP access is allowed. 1;2 SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported. 1;2;3-na/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security of no authentication (na) and no privacy (np). 1;2;3-a/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security of authentication enabled (a) but no privacy (np). 1;2;3-a/p SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security of authentication (a) with privacy (p) enabled. 3-na/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of no authentication (na) and no privacy (np). 3-a/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of authentication enabled (a) but no privacy (np). 3-a/p SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of authentication (a) with privacy (p) enabled. SNMP Set Cmty Name SNMP set community name is configured on the HP Jetdirect print server. An SNMP set community name is a password for write access to SNMP control functions (SNMP SetRequests) on the HP Jetdirect print server. Not Specified SNMP set community name is not set. Specified User-specified SNMP set community is set. SNMP Get Cmty Name SNMP get community name is configured on the HP Jetdirect print server. This is a password to determine which SNMP GetRequests the HP Jetdirect print server responds to. If a Get community name is set, the print server responds to either a user specified community name or the factory-default. 136 Chapter 8 HP Jetdirect configuration pages ENWW