HP 635n HP Jetdirect Print Servers - Administrator's Guide - Page 148
IPv4
UPC - 882780301016
View all HP 635n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Table 8-7 TCP/IP configuration information (continued) Message Description NPIxxxxxx Default name is NPIxxxxxx, where xxxxxx represents the last six digits of the LAN hardware (MAC) address. IPV4 DOMAIN NAME DNS name of the IPv4 domain in which the HP Jetdirect print server resides (for example, support.company.com). This is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included. Not Specified Domain name not configured on the print server. IPV6 DOMAIN NAME DNS name of the IPv6 domain in which the HP Jetdirect print server resides (for example, support.company.com). This is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included. Not Specified Domain name not configured on the print server. PRIMARY DNS SERVER IPv4 address of the DNS server. Not Specified Primary DNS server not configured on the print server. SECONDARY DNS SERVER IPv4 address of the DNS server. Not Specified Secondary DNS server not configured on the print server. DNS (IPV6) IPv6 address of one or more DNS servers. Not Specified IPv6 DNS server not configured on the print server. WINS SERVER IP address of the WINS server. Not Specified WINS server's IP address not detected or configured. IDLE TIMEOUT Timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Values are integers between 0 and 3600. A value of zero turns off the timeout mechanism. The default value is 270 seconds. IPv4 section Items displayed under the IPv4 section of the configuration page are discussed in the following table. Table 8-8 IPv4 Section Message Description STATUS Current TCP/IPv4 status. READY Print server is awaiting data over TCP/IP. DISABLED TCP/IP is manually disabled. INITIALIZING Print server is searching for the BOOTP server, or trying to get the configuration file through TFTP. An additional status message can also be displayed. An error code and message is displayed if the print server is not ready. For more information, see Table 8-14 Error messages on page 143. IP ADDRESS IPv4 address assigned to the HP Jetdirect print server. This is a required entry for operation of the print server on a TCP/IP network. During initialization, a temporary value 0.0.0.0 is displayed. After two minutes, a default IP address 169.254/16 or 192.0.0.192 is assigned. Not Specified IP address is not assigned or the value is zero. 138 Chapter 8 HP Jetdirect configuration pages ENWW