HP 6360t HP 6360t Mobile Thin Client - Maintenance and Service Guide - Page 45
Primary memory module, CAUTION
View all HP 6360t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Primary memory module Description 8 GB 4 GB 2 GB Spare part number 634091-001 621569-001 581096-001 Before removing the primary memory module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33). 5. Remove the service cover (see Solid-state module on page 34). Remove the primary memory module: 1. Pull away the retention clips (1) on each side of the memory module. (The memory module tilts up.) 2. Grasp the edge of the memory module, and then gently pull the memory module (2) out of the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. Reverse this procedure to install the primary memory module. Component replacement procedures 37