HP 6360t HP 6360t Mobile Thin Client - Maintenance and Service Guide - Page 47
toward you., Remove the two Phillips PM2.0×3.0 screws
View all HP 6360t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4. Remove the optical drive (3) from the optical drive bay. 5. If the optical drive space saver is installed, loosen the optical drive captive screw (1). 6. Using a flat-bladed screwdriver, gently push the tab (2) to release the optical drive space saver. 7. Remove the optical drive space saver (3) from the optical drive bay. 8. If it is necessary to replace the optical drive bracket, position the optical drive with the rear panel toward you. 9. Remove the two Phillips PM2.0×3.0 screws (1) that secure the bracket to the optical drive. Component replacement procedures 39
4.
Remove the optical drive
(3)
from the optical drive bay.
5.
If the optical drive space saver is installed, loosen the optical drive captive screw
(1)
.
6.
Using a flat-bladed screwdriver, gently push the tab
(2)
to release the optical drive space saver.
7.
Remove the optical drive space saver
(3)
from the optical drive bay.
8.
If it is necessary to replace the optical drive bracket, position the optical drive with the rear panel
toward you.
9.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the bracket to the optical drive.
Component replacement procedures
39