HP 6360t HP 6360t Mobile Thin Client - Maintenance and Service Guide - Page 51
Processor, Remove the processor
View all HP 6360t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Reverse this procedure to reassemble and install the heat sink. Processor Description Intel Celeron B810 1.60-GHz processor (1-MB L2 cache, 800-MHz FSB, includes replacement thermal material) Spare part number 646760-001 Before removing the processor, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 33), and then remove the following components: ● Service cover (see Solid-state module on page 34) ● Fan (see Fan on page 40) ● Heat sink (see Heat sink on page 41) Remove the processor: 1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn counterclockwise (1), until you hear a click. Component replacement procedures 43