HP 680n HP Jetdirect Print Servers - Administrator Guide - Page 279
Table C.1, HP Jetdirect Classic Control Panel Menu 3 of 6, The HP Jetdirect Control Panel Menu 279
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
Table C.1 HP Jetdirect Classic Control Panel Menu (3 of 6) Menu Item Description CFG EAP: This item appears if AUTH.=EAP was set. Choose one of the following: NO (default): Bypass EAP configuration. YES: Enable (ON) or disable (OFF) the EAP protocol used on your network. If an EAP protocol includes requirements that have not been preconfigured on the print server (such as a User Name, Password, Jetdirect certificate for the device, or CA certificate for the authentication server), the EAP protocol will not appear. The following EAP protocols can be enabled: I LEAP I PEAP I EAP-MD5 I EAP-TLS I EAP-TTLS You may enable multiple protocols simultaneously if required by your network. However, each enabled protocol may require additional configuration. DYNAMIC: This item appears if you selected an authentication method for a wireless print server that supports dynamic encryption. Select an available option: BASIC: Dynamic WEP encryption is supported. ROBUST: Dynamic Wi-Fi Protected Access (WPA) and WEP encryption protocols are supported. When configured for EAP/PSK authentication, the print server uses Robust encryption (WPA encryption protocols). When configured for EAP/802.1x authentication (LEAP, PEAP, TLS, TTLS only), the print server may be configured with either Basic encryption or Robust encryption depending on your network. Dynamic encryption protocols are under the control of the authentication server and also must be supported by the Access Point. ENWW The HP Jetdirect Control Panel Menu 279