HP 680n HP Jetdirect Print Servers - Administrator Guide - Page 61
Table 3.3, TFTP Configuration File Parameters 8 of 10, TCP/IP Configuration 61
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Table 3.3 TFTP Configuration File Parameters (8 of 10) ipx-banner: Enables or disables printing an IPX banner page. 0 disables banner pages. 1 (default) enables banner pages. ipx-eoj: Enables or disables IPX end-of-job notification. 0 disables, 1 (default) enables. ipx-toner-low: Enables or disables IPX toner-low notification. 0 disables, 1 (default) enables. AppleTalk appletalk: Enables or disables AppleTalk (EtherTalk) protocol operation on the print server: 0 disables, 1 (default) enables. name-override: (External print servers only) Specifies the name of the AppleTalk network. Up to 32 characters may be used. DLC/LLC dlc/llc: Enables or disables DLC/LLC protocol operation on the print server: 0 disables, 1 (default) enables. Other Settings link-type: (10/100 Fast Ethernet) Sets the print server's link speed (10 or 100 Mbps) and communication mode (Full- or Half-Duplex). Selections are AUTO, 100FULL, 100HALF, 10FULL, 10HALF. For AUTO (default), the print server uses autonegotiation to determine the link speed and mode. If autonegotiation fails, then 100HALF is set. webscan-config: Enables or disables the Web Scan feature on the print server when connected to a supported device. 0 disables, 1 (default) enables. scan-idle-timeout: Specifies the number of seconds (1 - 3600) that an idle scan connection is allowed to remain open. 0 disables the timeout. The default is 300 seconds. scan-email-config: Enable or disable the scan-to-email feature in the Web Scan server. 0 disables, 1 (default) enables. ENWW TCP/IP Configuration 61