HP 680n HP Jetdirect Print Servers - Administrator Guide - Page 97
Table 3.4, Telnet Commands and Parameters 17 of 18, TCP/IP Configuration 97
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Table 3.4 Telnet Commands and Parameters (17 of 18) usb-mode Specifies the communication mode over the USB port on the HP Jetdirect print server. G Auto (default): Automatically negotiates and sets the highest communication mode possible for the attached printer or device. G MLC: (Multiple Logical Channels) An HP-proprietary communication mode that allows multiple channels of simultaneous print, scan and status communications. G BIDIR: A standard connection that supports bi-directional communications between the printer and print server. The print server sends print data and receives status from the printer. G UNIDIR: A standard connection in which data is transferred in one direction only (to the printer). usb-speed (Read-only parameter, USB 2.0 products only) Specifies the autonegotiated communication speed over the USB connection between the HP Jetdirect print server and the device. G Full Speed: 12 Mbits/sec as specified in the USB v2.0 specifications, compatible with USB v1.1 specifications. G Hi-Speed: 480 Mbits/sec for USB v2.0 devices only. G Disconnected: The USB port is not connected. status-page-lang Specifies the printer job language (PJL) that the print server will use to send the Jetdirect configuration/status page to the printer. G Auto (default): The PDL is auto-detected when the print server is powered on or after a cold-reset. G PCL: Hewlett-Packard Printer Control Language G ASCII: Standard ascii characters G HPGL2: Hewlett-Packard Graphics Language (v2) G PS: Postscript language Support Settings Command Description Web JetAdmin URL (Read-only parameter) If HP Web Jetadmin discovers this device, the URL to access HP Web Jetadmin will be specified. Web JetAdmin Name (Read-only parameter) If HP Web Jetadmin discovers this device, the name of the HP Web Jetadmin host will be specified (if known). support-name Typically used to identify the name of a person to contact for support of this device. support-number Typically used to specify a phone or extension number to call for support of this device. ENWW TCP/IP Configuration 97