HP 680n HP Jetdirect Print Servers - Administrator Guide - Page 62
Table 3.3, TFTP Configuration File Parameters 9 of 10, TCP/IP Configuration 62
UPC - 808736198622
View all HP 680n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Table 3.3 TFTP Configuration File Parameters (9 of 10) MFP-config: Enable or disable print server support of the client software provided with your multifunction or all-in-one peripheral. 0 (default): disables client software support (allows printing only). 1: enables client software support (allows printing and scanning). usb-mode: Specifies the communication mode over the USB port on the HP Jetdirect print server. G Auto (default): Automatically negotiates and sets the the highest communication mode possible for the attached printer or device. G MLC: (Multiple Logical Channels) An HP-proprietary communication mode that allows multiple channels of simultaneous print, scan and status communications. G BIDIR: A standard connection that supports bi-directional communications between the printer and print server. The print server sends print data and receives status from the printer. G UNIDIR: A standard connection in which data is transferred in one direction only (to the printer). status-page-lang: Specifies the page description language (PDL) that the print server will use to send the Jetdirect configuration/status page to the printer. G Auto (default): The PDL is auto-detected when the print server is powered on or after a cold-reset. G PCL: Hewlett-Packard Printer Control Language G ASCII: Standard ascii characters G HPGL2: Hewlett-Packard Graphics Language (v2) G PS: Postscript language ENWW TCP/IP Configuration 62