HP 8/40 Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April - Page 178
EM-1065
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
17 EM-1065 Probable Cause Indicates the blade is being powered off because a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and you have selected to power off the problem blade when such a condition occurred. Recommended Contact support. Action Severity CRITICAL EM-1065 Message , [EM-1065], ,, CRITICAL, , SSAS Virtualization Services are not available due to incompatibility between the FOS and SAS versions. Probable Cause Indicates the version of either the control processor firmware (CFOS) or the blade processor firmware (BFOS) is not compatible with the Storage Application Services (SAS) or other application firmware versions. Recommended Upgrade the FOS firmware or the SAS firmware with the firmwareDownload command. Refer to the Action release notes for a compatible version of firmware. Severity CRITICAL EM-1066 Message , [EM-1066], ,, INFO, , SAS Virtualization Services are now available . Probable Cause Indicates the previously incompatible Fabric OS or Storage Application Services (SAS) firmware has been upgraded and is now compatible. Recommended No action is required. Action Severity INFO EM-1067 Message , [EM-1067], ,, WARNING, , Stopping synchronization of the system due to version incompatibility with standby CP. Probable Cause Indicates that the software version on the standby CP is not compatible with this software version. Recommended Upgrade the software on the standby CP or downgrade the software on this CP. Action Severity WARNING 120 Fabric OS Message Reference 53-1001157-01