HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - Ready Reference Guide, C - Page 11
Control Panel - 5 - 50 3 fuser error
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Message Explanation 13.x PAPER JAM [LOCATION] Remove jammed paper from the specified location. Open and close the top cover to clear the message. If the message persists after all jams have been cleared, a sensor may be stuck or broken. Contact an HP-authorized service or support provider. (See the HP Support pages in the online user guide for the printer.) 41.3 UNEXPECTED PAPER SIZE The paper size you are trying to print is not the same as the control panel setting for Tray 1. Reload the tray with the correct paper size. Make sure that the control panel setting for Tray 1 or the Envelope Feeder is correctly adjusted for size. (The printer will continue trying to print the job until size settings are correct.) After performing the actions above, press Go twice. The page containing the error will automatically be reprinted. (Or, you might want to press Cancel Job to clear the job from the printer's memory.) 50.x FUSER ERROR An internal error has occurred. Turn the printer off, and then turn the printer on. The message might clear, and then reappear when the next print job is sent. If this message persists, contact an HP-authorized service or support provider. 51.x or 52.x PRINTER ERROR A temporary printing error occurred. Turn the printer off, and then turn the printer on. If this message persists, contact an HPauthorized service or support provider. EN Control Panel - 5