HP 8150dn Service Manual - Page 620
Printer Error, Press Go To, Continue, Cycle Power To, Fan Failure - 58 1 error
UPC - 725184623127
View all HP 8150dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 620 highlights
Table 7-5. Engine Error Messages (continued) Control Panel Event Description Message Log Error Message Recommended Action 55.x Error PRINTER ERROR alternates with PRESS GO TO CONTINUE A printer error has occurred. X Description 0 NO_RESET_REPORT 1 NO_ENGINE_RESPONSE 2 EXCESSIVE_GLITCHES 3 LOST_PPRDY_SIGNAL 4 COMMUNICATION_TIMEOUT 5 BAD_TRAY_BIN_REPORTS 6 ECC7_COMMAND_ERROR 7 INCOMING_PARITY_ERROR 8 OUTGOING_PARITY_ERROR 9 MISSED_INTERRUPT A HUNG_COMMUNICATIONS B LOST_XISR_ERROR C INVALID_BUS_TIMEOUT D VERY_LATE_ECOMM_ISR 1. Press GO to clear the error message. 2. Turn the printer off and reseat the formatter board, all DIMMs, EIO Cards, and the hard disk drive. 4. Check the cable from the DC controller and laser/scanner assembly. 5. Replace the laser scanner assembly. 6. Replace the DC controller PCA. 7. Replace the formatter board. 56.x Error PRINTER ERROR alternates with CYCLE POWER TO CONTINUE A temporary printing error occurred. X Description 1 Illegal input. 2 Illegal output. 1. Press GO. The page containing the error will automatically be reprinted. 2. Turn the printer off, and then turn the printer on. 3. Check the printer's configuration. 57.X FAN FAILURE Critical Error A fan motor failure occurred. All fans Turn the printer off, and then turn are enabled to low speed operation the printer on. at power on. Fans will go into high If the message continues, check speed operation during the print and reseat the cabling between cycle. the fan motors and the DC X Description Controller PCA. 2 Fan 3 - Formatter Fan (intake) 3 Fan 2 - Low-voltage power supply (exhaust) 5 Fan 1 -Laser/scanner (exhaust) Low-voltage power supply (exhaust) 6 Fan 4 - Face-down delivery (exhaust) 9 Fan 5 - Tray 1 fan 58.x Error PRINTER ERROR alternates with CYCLE POWER TO CONTINUE A temporary printing error occurred. Turn the printer off, and then turn X Description the printer on. 1 Tray 1 lifter malfunction. 2 Tray 2 lifter malfunction. 3 Tray 3 lifter malfunction. 4 Tray 4 lifter malfunction. X Tray X lifter malfunction. C4265-90907Printer and Paper-Handling Devices Messages 603