HP A7533A HP StorageWorks Fabric OS 5.X Procedures User Guide (AA-RVHWB-TE, Se - Page 131
Port speed: The speed of the Port 1G, 2G, 4G, N1, N2, N4, or AN. The speed can be fixed
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
For example: switch:admin> switchstatusshow Switch Health Report Report time: 03/21/2005 03:50:36 PM Switch Name: SW3900 IP address: 10.33.54.176 SwitchState: MARGINAL Duration: 863:23 Power supplies monitor MARGINAL Temperatures monitor HEALTHY Fans monitor HEALTHY WWN monitor HEALTHY Standby CP monitor HEALTHY Blades monitor HEALTHY Flash monitor HEALTHY Marginal ports monitor HEALTHY Faulty ports monitor HEALTHY Missing SFPs monitor HEALTHY All ports are healthy switch:admin> For more information on how the overall switch status is determined, see the switchStatusPolicySet command in the HP StorageWorks Fabric OS 5.x command reference guide. Displaying switch information 1. Connect to the switch and log in as admin. 2. Issue the switchShow command. This command displays the following information for a switch: • switchname displays the switch name. • switchtype displays the switch model and firmware version numbers. • switchstate displays the switch state: Online, Offline, Testing, or Faulty. • switchrole displays the switch role: Principal, Subordinate, or Disabled. • switchdomain displays the switch Domain ID. • switchid displays the embedded port D_ID of the switch. • switchwwn displays the switch WWN. • switchbeacon displays the switch beaconing state: either ON or OFF. The switchShow command also displays the following information for ports on the specified switch: • Module type: The SFP type, if an SFP is present. • Port speed: The speed of the Port (1G, 2G, 4G, N1, N2, N4, or AN). The speed can be fixed, negotiated, or auto-negotiated. • Port state: The port status. • Comment: Information about the port. This section might be blank or display the WWN for the F_Port or E_Port, trunking state, upstream or downstream status. The details displayed for each switch differ for different switch models. For more information, see the switchShow command in the HP StorageWorks Fabric OS 5.x command reference guide. Displaying the uptime for a switch 1. Connect to the switch and log in as admin. 2. Issue the uptime command. Fabric OS 5.x administrator guide 131