HP A7533A HP StorageWorks Fabric OS 5.X Procedures User Guide (AA-RVHWB-TE, Se - Page 59
Setting the security level, Using the snmpConfig command, HP StorageWorks Fabric OS 5.x MIB reference
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
You can also use the following MIBs and their associated traps: • FICON-MIB (for FICON environments) • HA-MIB (for the Core Switch 2/64 and SAN Director 2/128) • SW-EXTTRAP, whcih includes the Software Serial Number (swSsn) as a part of HP StorageWorks SW traps. It is also used with the legacy Integrated/64 SAN Switch fabrics product to provide detailed group information for a particular trap. For information on HP StorageWorks MIBs, see the HP StorageWorks Fabric OS 5.x MIB reference guide. For information on the specific commands used in these procedures, see online help or the HP StorageWorks Fabric OS 5.x command reference guide. Setting the security level Use the configure command to set the security level (called SNMP attributes). You can specify no security, authentication only, or authentication and privacy. For example, to configure for authentication and privacy: switch:admin> configure Not all options will be available on an enabled switch. To disable the switch, use the "switchDisable" command. Configure... System services (yes, y, no, n): [no] ssl attributes (yes, y, no, n): [no] http attributes (yes, y, no, n): [no] snmp attributes (yes, y, no, n): [no] y Select SNMP Security Level: (0 = No security, 1 = Authentication only, 2 = Authentication and Privacy): (0..2) [0] 2 Using the snmpConfig command Use the snmpConfig --set command to change either the SNMPv3 or SNMPv1 configuration. You can also change access control, MIB capability, and system group. Fabric OS 5.x administrator guide 59