HP A7533A HP StorageWorks Fabric OS 5.X Procedures User Guide (AA-RVHWB-TE, Se - Page 228
Brocade 4Gb SAN Switch for HP p-Class BladeSystem, and SAN Switch 4/32, issue
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Use the following procedure to swap the port area IDs of two physical switch ports. In order to swap port area IDs, the port swap feature must be enabled, and both switch ports must be disabled. The swapped area IDs for the two ports remain persistent across reboots, power cycles, and failovers. 1. Connect to the switch and log in as admin. 2. Enable the port swap feature: portswapenable 3. For the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, and SAN Switch 4/32, issue the following commands: portdisable port1 portdisable port2 For the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director, issue the following commands: portdisable slot/port1 portdisable slot/port2 4. For the 4/8 SAN Switch, 4/16 SAN Switch, SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch 2/32, Brocade 4Gb SAN Switch for HP p-Class BladeSystem, and SAN Switch 4/32, issue the following command: portswap port1 port2 For the Core Switch 2/64, SAN Director 2/128, and 4/256 SAN Director, issue the following command: portswap slot1/port1 slot2/port2 5. Verify that the port area IDs have been swapped: portswapshow A table is shows the physical port numbers and the logical area IDs for any swapped ports. 6. Disable the port swap feature: portswapdisable 228 Configuring the PID format