HP BLc7000 HP Direct-Connect External SAS Storage for HP BladeSystem Solutions - Page 113
MDS600 and MSA2000 G2 to the same c-Class enclosure
View all HP BLc7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
MDS600 and MSA2000 G2 to the same c-Class enclosure This example illustrates cabling from one BladeSystem c-Class enclosure to both an MSA2000sa G2 controller enclosure and an MDS600 storage enclosure. In this type of configuration, note the following: IMPORTANT: • In a solution with both zoned and shared storage enclosures, a server bay can be assigned to either zoned or shared zone groups. (Cannot be assigned to both types of storage enclosures.) • The MSA2012sa is not supported for use in this configuration. Devices and quantities MSA2300sa controller enclosures: 1 MSA2000 drive enclosures: 3 MDS600 storage enclosures: 1 c7000 enclosures: 1 3Gb SAS BL Switches: 2 Server blade types: half-height and full-height Connection details • Switch in interconnect bay 5: ◦ Port 1: to MSA G2 SAS port A1 ◦ Port 2: to MSA G2 SAS port B1 ◦ Port 3: to MDS600 drawer 2, primary I/O module, port 1 ◦ Port 4: to MDS600 drawer 2, primary I/O module, port 2 ◦ Port 7: to MSA2000sa drawer 1, primary I/O module, port 1 ◦ Port 8: to MDS600 drawer 1, primary I/O module, port 2 • Switch in interconnect bay 6: ◦ Port 1: to MSA G2 SAS port A1 ◦ Port 2: to MSA G2 SAS port B1 ◦ Port 3: to MDS600 drawer 2, secondary I/O module, port 1 ◦ Port 4: to MDS600 drawer 2, secondary I/O module, port 2 ◦ Port 7: to MSA2000sa drawer 1, secondary I/O module, port 1 ◦ Port 8: to MDS600 drawer 1, secondary I/O module, port 2 MDS600 and MSA2000 G2 to the same c-Class enclosure 113