HP Brio 83xx hp brio 83xx, online reference guide - Page 57
Storage Device Cables, System Board, Connectors
View all HP Brio 83xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 Upgrading and Adding Accessories Adding Accessories Storage Device Cables Your computer has the following cables which may be used by storage devices: • A primary IDE hard disk drive cable with two connectors. This cable supports up to two IDE hard disk drives, one of which is already connected to the Master connector on this cable. • A secondary IDE drive cable with two connectors. If you already have a CD-ROM drive installed, it is connected to the Master connector on this cable. If you install a CD-ROM drive, or a third hard disk drive, or both, connect it or them to this cable. • A floppy disk drive cable. This supports up to two floppy disk drives (or one floppy disk drive and one tape drive). One 3.5-inch floppy disk (Drive A) is already connected to the Master connector on this cable. System Board Connectors If you add a floppy disk drive, hard disk drive, CD-ROM drive, Zip drive, or tape drive, you need to connect it to power and data cables. The connectors are shaped to fit one way only. The data cables are shown below. CD-ROM HDD FDD System Board FDD Master (Drive A) FDD Slave Secondary IDE Connector Primary IDE Connector Floppy Disk Connector Connectors for 3.5-inch Floppy Disk Drives or Tape Drives Connectors for Primary IDE devices Primary Master Primary Slave Secondary Slave Connectors for Secondary IDE devices (CD-ROM Drives, Zip Drives, or IDE Hard Disk Drives) Secondary Master 57