HP Brocade 8/12c Brocade Network Advisor SMI Agent Developer's Guide - Page 62
Supported classes and associations, FC HBA profile, Prerequisites, Data model
![]() |
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3 FC HBA profile • The Brocade_CPModule.ModuleNumber shows the slot number of the CP blade. • The Brocade_CPModule is associated to the Brocade_PhysicalComputerSystem using Brocade_CPInPCS:CIM_SystemDevice. This association shows the containment relationship on the logical side. • Each Brocade_CPModule is associated to a Brocade_CPMgmtAccessPoint, which shows the IP address of the CP. • Each Brocade_CPModule is associated to a Brocade_CPSoftwareIdentity instance, which shows the firmware running on the CP. • The Brocade_CPModule instances is aggregated to the Brocade_PhysicalComputerSystem, which is the parent system. Supported classes and associations The supported classes and associations are shown in Figure 24. FC HBA profile The Fibre Channel Host Bus Adapter (FC HBA) profile is similar to the FDMI subprofile. As with FDMI, this model also supports all HBA configurations such as single node-single port HBA, single-node dual-port HBA, and dual-node dual-port HBA. Prerequisites Only the HBAs discovered in Brocade Network Advisor are exposed through the FC HBA profile. Data model Figure 25 shows the data model of the FC HBA profile. 50 Brocade Network Advisor SMI Agent Developer's Guide 53-1002169-01
![](/manual_guide/products/hewlettpackard-brocade-812c-brocade-network-advisor-smi-agent-developer039s-guide-v1110-53100216901-2011-7dd45ca/62.png)