HP Brocade 8/24c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 855

Thresholds and event notification 27 Assigning a threshold policy To assign a threshold policy to a fabric or device, complete the following steps. 1. Select Monitor > Performance > Configure Thresholds. The Set Threshold Policies dialog box displays. 2. Select one or more threshold policies you want to assign to a fabric or device in the Available Threshold Policies table. Press Ctrl or Shift and then click to select multiple policies. 3. Select one or more fabrics or devices to which you want to assign the policy in the Available Threshold Policies table. If you choose to assign the policy to a fabric and a M-EOS logical switch is present in the fabric, the policy is not assigned to the M-EOS logical switch. You must directly assign a policy to a M-EOS physical chassis. When you directly assign a policy to a M-EOS physical chassis, the policy is assigned to all logical switches in the physical chassis. Press Ctrl or Shift and then click to select multiple fabrics or devices. 4. Click the right arrow button to apply the selected policies to the selected fabrics and devices. If any of the selected devices do not have a Fabric Watch license, the threshold policies are not set on the device and a message displays listing the affected devices. You will need to upgrade the Fabric Watch license and then assign threshold policies to these devices. Click OK to close the message. 5. Click OK on the Set Threshold Policies dialog box. The Confirm Threshold Changes dialog box displays. 6. Make the threshold changes by selecting one of the following options: • To only add new thresholds, select the Keep currently set thresholds and only add new thresholds check box. • To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all thresholds currently set on all switches check box. 7. Click OK on the Confirm Threshold Changes dialog box. Deleting a threshold policy To delete a threshold policy, complete the following steps. 1. Select Monitor > Performance > Configure Thresholds. The Set Threshold Policies dialog box displays. 2. Select the threshold policy you want to delete in the Available Threshold Policies table. When you delete a policy from the M-EOS physical chassis, the policy is deleted from all logical switches in the physical chassis. 3. Click Delete. The threshold policy displays in the Available Threshold Policies table with a removed icon ( ). Brocade Network Advisor SAN User Manual 811 53-1002167-01