HP Brocade 8/24c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 912

30 Event action definitions FIGURE 385 Add Events dialog box - Events pane 5. Select one of the following event types from the Show list: • Traps (default) • Application Events • Pseudo Events • Custom Events Depending on what event type you select, a box listing the available events or pseudo events displays. 6. By default, all traps are listed in the Available Traps list, under the folders for the MIB to which they belong. You can limit the list by doing any of the following: • Click one of the following buttons:  MIB Information, if you want the default SNMP name for the traps to be displayed.  MIB Alias, if you want the aliases for the traps to be displayed. • Use the Trap Filter tool to limit the trap list to the trap severities you want. To use this tool, click the Filter button to display the Trap Filters dialog box. 7. After limiting the list of available traps, expand the MIB folder to which the trap you want belongs under the Available Traps list and select that trap. Click the right arrow button to move it to the Selected Traps list. 8. If you selected Application Events in step 5, select the application events in the left table and use the arrow buttons to move them to the right. 9. If you selected Pseudo Events in step 5, select one or more of the pseudo events you created that you want to include in the definition, then click the right arrow button to move it to the Selected Pseudo Events list. 10. If you selected Custom Events in step 5, click Next to accept the defaults; otherwise, select the Event Category, Severity, Message ID, and Description Contains, as required. 868 Brocade Network Advisor SAN User Manual 53-1002167-01