HP Brocade 8/24c Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01 - Page 918

30 Event action definitions Editing event actions The Edit Event Action Group - Actions dialog box, shown in Figure 389, defines what action the Management application takes when the criteria are met. FIGURE 389 Action Group - Actions pane of the Edit Event Action dialog box 1. Select Apply as a Logging Policy to indicate whether or not you want the event occurrence to be logged in the Management application database: • Select Log to log the occurrence in the Management application database and master log. • Select Drop to not log the occurrence in the Management application database or master log. NOTE If the policy specifies Act as specified on the Policy pane of the Add Event Action dialog box, and you select Log for this parameter, only events that meet the criteria defined in the Act as specified area are logged. For example, if the event is logged when 10 link down traps occur during a one-minute interval, then one record will be logged after 10 link down traps occur. If you want all 10 link down traps to be logged, then create a policy where Act on all occurrences is selected on the Policy pane of the Add Event Action dialog box. 2. Select the Alert by E-mail check box if you want an e-mail message to be sent to an administrator if the policy criteria have been met. 3. Select the Launch a Script check box if you want to execute to an external script file when the matching criteria have been met, and then enter the script in the accompanying field. 4. Select the Broadcast to Client check box, and click Configure to broadcast a message to all the clients when the matching criteria have been met. NOTE The remaining parameters are not available if a non-Brocade product is selected as an event sender. 874 Brocade Network Advisor SAN User Manual 53-1002167-01