HP Brocade BladeSystem 4/12 Brocade Network Advisor SAN User Manual v11.1x (53 - Page 176

4 Fabric tracking • Device Ports-This table shows a brief summary of the device ports including status (whether the device port will be added ( ) or removed ( ) from the fabric), device type, port, port WWN, node WWN, and attached port number. • Connections-This table shows a brief summary of the switch connections including the status (whether the device port will be added ( ) or removed ( ) from the fabric) and connection type as well as the WWN, domain ID, IP address, and port number of the connected switches. 2. Click Yes to accept changes. Accepting changes for all fabrics 1. Accept the changes to all fabrics by choosing one of the following options: • Click in the white space on the Connectivity Map and select Monitor > Accept All Changes. • Right-click in the white space on the Connectivity Map and select Accept All Changes. A message displays listing the following information: • Do not show me this again check box--Select if you do not want to see this dialog box again when you enable or disable fabric tracking or accept changes for a switch or fabric. • Switches-This table shows a brief summary of the switches including status (whether the device port will be added ( ) or removed ( ) from the fabric), name, fabric name, IP address, WWN, and domain ID. • Device Ports-This table shows a brief summary of the device ports including status (whether the device port will be added ( ) or removed ( ) from the fabric), device type, port, fabric name, port WWN, node WWN, and attached port number. • Connections-This table shows a brief summary of the switch connections including the status (whether the device port will be added ( ) or removed ( ) from the fabric) and connection type as well as the fabric name, WWN, domain ID, IP address, and port number of the connected switches. 2. Click Yes to accept changes. Accepting changes for a switch, access gateway, or phantom domain 1. Accept the changes to a switch, access gateway, or phantom domain by choosing one of the following options: • Select the switch, access gateway, or phantom domain on the Product List or Connectivity Map and select Monitor > Accept Changes. • Right-click the switch, access gateway, or phantom domain on the Product List or Connectivity Map and select Accept Change. The Accept Changes Summary dialog box displays. This dialog box includes the following information: • Do not show me this again check box--Select if you do not want to see this dialog box again when you enable or disable fabric tracking or accept changes for a switch or fabric. • Fabric Name-Displays the name of the selected fabric. • Switches-This table shows a brief summary of the switches including status (whether the device port will be added ( ) or removed ( ) from the fabric), name, IP address, WWN, and domain ID. 132 Brocade Network Advisor SAN User Manual 53-1002167-01