HP Brocade BladeSystem 4/12 Brocade Network Advisor SAN User Manual v11.1x (53 - Page 903

30 SNMP traps FIGURE 378 SNMP v1/v2 Community String dialog box 4. Enter a unique community string in the Community String field, which will be used to match for authentication in SNMP v1 and v2c configurations. This field is case-sensitive. 5. Re-enter the string in the Confirm Community String field. 6. Click OK. Importing a new MIB into the Management application The SNMP traps that the Management application receives must be registered in the Management application in order for these traps to be available. To register a trap, you must first identify the MIB file that contains the trap information in the mibs_to_compile.txt file. Then, you must register the traps using the Event Reception dialog box. Follow the procedure below to add the MIB file that contains the trap you want to register to mibs_to_compile.txt. 1. Go to \conf\mibs\ (Windows) or /conf/mibs/ (UNIX) directory and copy the MIB file into that directory. You may want to copy the MIB into a subdirectory of that directory. 2. In the \conf\mibs\ (Windows) or /conf/mibs/ (UNIX) directory, search for the mibs_to_compile.txt file. 3. Using a text editor, open the mibs_to_compile.txt file and add the MIB information to the document. When adding the MIB information, be aware of the following rules: • MIBs are compiled in the order that they are listed in the mibs_to_compile.txt file. • You can add composite MIB files (more than one MIB in a single file). • MIB filenames in the mibs_to_compile.txt file are case-sensitive. Make sure the case of the file name you enter matches the case of the actual MIB file. Also, be sure to enter the complete path of the MIB file, or the portion relative to the mibs directory. The following is an example of how to add the two Cisco MIB files. # # Cisco Mibs # CISCO-SMI.mib CISCO-CONFIG-COPY-MIB.mib # # End Cisco Mibs # Brocade Network Advisor SAN User Manual 859 53-1002167-01