HP CM4730 HP Color LaserJet CM4730 MFP - User Guide - Page 146
Enable or disable automatic two-sided printing in the Macintosh printer driver
UPC - 882780899667
View all HP CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Enable or disable automatic two-sided printing in the Macintosh printer driver Use automatic duplex printing 1. Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of the following ways: ● For tray 1, load the letterhead paper face-up with the bottom edge feeding into the printer first. ● For all other trays, load the letterhead paper face-down with the top edge at the back of the tray. 2. Open the printer driver (see Open the printer drivers). 3. Open the Layout pop-up menu. 4. Next to Two Sided Printing, select either Long-Edge Binding or Short-Edge Binding. 5. Click Print. Layout options for printing on both sides The following are the four duplex orientation options. To select option 1 or 4, select Flip Pages Up in the printer driver. 1 2 3 4 1. Long-edge landscape 2. Short-edge landscape 3. Long-edge portrait 4. Short-edge portrait 130 Chapter 9 Print tasks This layout is often used in accounting, data processing, and spreadsheet programs. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom. Each printed image is oriented right-side-up. Facing pages are read from top to bottom on the left page, and then from top to bottom on the right page. This is the default setting, and the most common layout used, with every printed image oriented right-side-up. Facing pages are read from top to bottom on the first page, and then from top to bottom on the second page. This layout is often used with clipboards. Every other printed image is oriented upside-down. Facing pages are read continuously from top to bottom. ENWW