HP CM4730 HP Color LaserJet CM4730 MFP - User Guide - Page 51
Menu item, Sub-menu item, Values and Description, CAUTION, LAN HW Test, SNMP Test, Data Path Test
UPC - 882780899667
View all HP CM4730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Table 2-11 Jetdirect menus (continued) Menu item Sub-menu item Sub-menu item LAN HW Test HTTP Test SNMP Test Data Path Test Select All Tests Execution Time [H] Execute Values and Description CAUTION Running this embedded test will erase your TCP/IP configuration. This test performs an internal loopback test. An internal loopback test will send and receive packets only on the internal network hardware. There are no external transmissions on your network. Select Yes to choose this test, or No to not choose it. This test checks operation of HTTP by retrieving predefined pages from the device, and tests the embedded Web server. Select Yes to choose this test, or No to not choose it. This test checks operation of SNMP communications by accessing predefined SNMP objects on the device. Select Yes to choose this test, or No to not choose it. This test helps to identify data path and corruption problems on an HP postscript level 3 emulation device. It sends a predefined PS file to the device, However, the test is paperless; the file will not print. Select Yes to choose this test, or No to not choose it. Use this item to select all available embedded tests. Select Yesto choose all tests. Select No to select individual tests. Use this item to specify the length of time (in hours) that an embedded test will be run. You can select a value from 1 to 60 hours. If you select zero (0), the test runs indefinitely until an error occurs or device is turned off. Data gathered from the HTTP, SNMP, and Data Path tests is printed after the tests have completed. No*: Do not initiate the selected tests. Yes: Initiate the selected tests. ENWW Initial Setup menu 35