HP Chromebook 11 G9 Education Edition Maintenance and Service Guide - Page 41
Touchpad, that covers the touchpad screws.
View all HP Chromebook 11 G9 Education Edition manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
5. Remove the touchpad cable (4). Reverse this procedure to install the touchpad cable Touchpad To remove the touchpad, use this procedure and illustration. Table 5-2 Touchpad description and part numbers Description Spare part number Touchpad: NOTE: The touchpad spare part kit does not include the touchpad bracket or touchpad cable. The touchpad bracket is included in the Bracket Kit, spare part number L89791-001 The touchpad cable is included in the Cable Kit, spare part number M47368-001. In jet black finish M47384-001 In nautical teal finish M47385-001 Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 29). 2. Remove the top cover/keyboard (see Top cover/keyboard on page 29). Remove the touchpad: 1. Position the top cover/keyboard upside down with the front toward you. 2. Detach the touchpad cable (1) from the top cover/keyboard. (The touchpad cable is attached to the top cover/keyboard with double-sided adhesive.) 3. Detach the clear shield (2) that covers the touchpad screws. 4. Remove the three Phillips M2.0 × 2.2 broad head screws (3) that secure the touchpad to the computer. 5. Remove the four Phillips M2.0 × 2.5 screws (4) that secure the touchpad bracket and touchpad to the computer. ENWW Component replacement procedures 33