HP Chromebook 14 G3 Chromebook model numbers 14- x000 through 14-x099 Maintena - Page 37

Battery, to the battery with double-sided adhesive.

Get HP Chromebook 14 G3 PDF manuals and user guides View all HP Chromebook 14 G3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Battery Description Battery, 3-cell, 37-WHr, 2.96-AHr, Li-ion (includes cable) Spare part number 774159-001 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 23). Remove the battery: 1. Remove the eight Phillips PM1.9×2.8 screws (1) that secure the battery to the base enclosure. 2. Detach the connector board cable (2) from the battery. (The connector board cable is attached to the battery with double-sided adhesive.) 3. Lift the front edge of the battery (3) until it rests at an angle. 4. Remove the battery (4) by sliding it up and forward at an angle. Reverse this procedure to install the battery. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Battery
Description
Spare part number
Battery, 3-cell, 37-WHr, 2.96-AHr, Li-ion (includes cable)
774159-001
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
23
).
Remove the battery:
1.
Remove the eight Phillips PM1.9×2.8 screws
(1)
that secure the battery to the base enclosure.
2.
Detach the connector board cable
(2)
from the battery. (The connector board cable is attached
to the battery with double-sided adhesive.)
3.
Lift the front edge of the battery
(3)
until it rests at an angle.
4.
Remove the battery
(4)
by sliding it up and forward at an angle.
Reverse this procedure to install the battery.
Component replacement procedures
31