HP Chromebook x360 11 G2 EE Maintenance and Service Guide - Page 54
Power cable, Remove the system board see
![]() |
View all HP Chromebook x360 11 G2 EE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Power cable NOTE: The power board spare part kit does not include the power cable. The power cable is included in the Cable Kit, spare part number L53204-001. Before removing the power cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Keyboard/top cover on page 25). 5. Disconnect the battery cable from the system board (see Battery on page 34). 6. Remove the system board (see System board on page 40). Remove the power cable: 1. Turn the system board upside down with the rear toward you. 2. Disconnect the power cable from the system board. Reverse this procedure to install the power cable. 44 Chapter 5 Removal and replacement procedures for Approved Service Provider Parts
![](/manual_guide/products/hewlettpackard-chromebook-x360-11-g2-ee-maintenance-service-guide-0419175/54.png)