HP Chromebook x360 Maintenance and Service Guide - Page 45

Connector board cables, Release the ZIF connectors

Get HP Chromebook x360 PDF manuals and user guides View all HP Chromebook x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Connector board cables NOTE: The connector board cables are included in the Cable Kit, spare part number L92200-001. Before removing the connector board cables, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Disconnect the battery cable from the system board (see Battery on page 35). Remove the connector board cables: 1. Release the shielding (1) that covers the connector board cable ZIF connectors. 2. Release the ZIF connectors (2) to which the connector board cables are connected, and then disconnect the connector board cables from the system board. 3. Release the ZIF connectors (3) to which the connector board cables are connected, and then disconnect the connector board cables from the connector board. 4. Remove the connector board cables (4). Reverse this procedure to install the connector board cables. Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
Connector board cables
NOTE:
The connector board cables are included in the Cable Kit, spare part number L92200-001.
Before removing the connector board cables, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
35
).
Remove the connector board cables:
1.
Release the shielding
(1)
that covers the connector board cable ZIF connectors.
2.
Release the ZIF connectors
(2)
to which the connector board cables are connected, and then disconnect
the connector board cables from the system board.
3.
Release the ZIF connectors
(3)
to which the connector board cables are connected, and then disconnect
the connector board cables from the connector board.
4.
Remove the connector board cables
(4)
.
Reverse this procedure to install the connector board cables.
Component replacement procedures
39