HP Cisco MDS 8/24c HP C-series Fabric Switches for NX-OS 5.0(4d) Release Notes - Page 10

SAN-OS 3.x TO NX-OS 5.x MIGRATION MDS Switch Model MDS 9513 with Fabric-2 Modules HP SN8000C 13-Slot Supervisor 2A Fabric 2 Director Switch MDS 9513 with Fabric-1 Modules MDS 9509 with Supervisor-2 or Supervisor 2A Modules HP SN8000C 9-Slot Supervisor 2A Director Switch MDS 9506 with Supervisor-2 or Supervisor 2A Modules HP SN8000C 9-Slot Supervisor 2A Director Switch Supported with NX-OS 5.x yes yes yes yes MDS 9509 with Supervisor-1 Modules no MDS 9506 with Supervisor-1 Modules no MDS 9222i yes MDS 9216i no MDS 9216A no MDS 9134 yes MDS 9124 yes MDS 9124e yes MDS 9140 no MDS 9120 no MDS 9020 no Recommendation Refer to C-series Support Matrix for supported switching modules Refer to C-series Support Matrix for supported switching modules Refer to C-series Support Matrix for supported switching modules Refer to C-series Support Matrix for supported switching modules You must upgrade to Supervisor-2A modules. Refer to the HP Quick Specs for the Supervisor-2A upgrade kit part number You must upgrade to Supervisor-2A modules. Refer to the HP Quick Specs for the Supervisor-2A upgrade kit part number Refer to C-series Support Matrix for supported switching modules Switch can be upgraded to NX-OS 4.x or remain on SAN-OS 3.x. These switches must remain on SAN-OS 3.x These switches must remain on SAN-OS 3.x These switches must remain on SAN-OS 3.x This switch must remain on FabricWare 10 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes