HP Cluster Platform Interconnects v2010 HP Cluster Platform ProLiant G6 and G7 - Page 35
Rear panel LEDs and buttons (DL165 G7), PCI expansion slot definitions (DL165 G7)
View all HP Cluster Platform Interconnects v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Rear panel LEDs and buttons (DL165 G7) Item 1 2 3 4 5 Description UID button/LED Pilot 2 NIC activity LED Pilot 2 NIC link LED NIC speed LED NIC activity LED Status Blue = Identification is activated. Flashing blue = System is being managed remotely. Off = Identification is deactivated. Flashing amber = Activity exists. Off = No activity exists. Green = Link exists at 100 Mbps speed. Off = No link exists, or link exists at 10 Mbps speed. Green = Link exists at 10 Mbps/100 Mbps/1G/10G. Off = No link exists, or link exists at 10 Mbps speed. Green = Link exists. Flashing green = Activity and link exists. Off = No network activity exists. PCI expansion slot definitions (DL165 G7) The HP ProLiant DL165 G7 Server has two PCIe2 slots on the system board. Slot Type 1 PCIe2 1 PCIe2 2* PCIe2 Form factor Full-height/full-length Half-length/full-length Half-height/low-profile Connector Width x16 x8 x8 Bus Width x16 x4 x4 *To access slot 2 (the low-profile internal only slot), slot 1 may only be populated with a half-length, full-height form factor expansion board. Always install an InfiniBand PCIe HCA in slot 1 of this server. HP ProLiant DL385 G6 Server The HP ProLiant DL385 G6 Server is used as a control node and utility node in HP Cluster Platform configurations. HP ProLiant DL385 G6 Server documentation For server-specific information, see the server documentation: HP ProLiant servers (rack) 35