HP Color Copier 210Lx HP Color Copier Model 210/210LX - (English) User Guide - Page 49
White or Color Start button. Refer to Load the Print Cartridges in, for Letter/Legal.
View all HP Color Copier 210Lx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
If the indicated problem is with the print cartridges... 3 Look at the ink-level indicator to make sure none of the print cartridges is out of ink. (Refer to "Reading the ink-level indicator" in Chapter 2.) 3 Make sure that all tape has been removed from the print-cartridge nozzles. 3 Make sure that all print cartridges are snapped fully forward in the carriage. If they are not properly installed, the front panel will display an error message instructing you to remove and check a cartridge. After you fix this problem, close the lid and press either the Black/ White or Color Start button. (Refer to "Load the Print Cartridges" in Chapter 1.) If the indicated problem is with the loaded paper... 3 Push the paper-length adjuster forward to make sure the paper is loaded fully forward in the lower tray. Be careful not to bend the paper. 3 Make sure that the paper-width selector is set for the paper width you are using (to the back of the copier for A4 and to the front of the copier for Letter/Legal). If your copier has a paper jam, make sure that... 3 The lid is closed. 3 The paper-width selector is set for the paper width you are using. 3 The proper size paper is being used. 3 Paper is loaded fully forward in the tray. If you see the message Turn Power off and then on again, do so. If you see the message Error #### (Error followed by a number), write down the error number and call for service. 6-2 Troubleshooting and Maintenance