HP Color LaserJet 4610n HP Color LaserJet 4610n - User Guide - Page 53

Menu item JOB HELD TIMEOUT SHOW ADDRESS COLOR/BLACK MIX Values Description OFF 1 HOUR 4 HOURS 1 DAY 1 WEEK Sets the period of time that the system keeps files in job storage before deleting them from the queue. The default is OFF. AUTO OFF This item determines whether the printer's IP address is shown on the display with the Ready message. The default is OFF. AUTO MOSTLY COLOR PAGES MOSTLY BLACK PAGES This menu item establishes how the printer switches from color to monochrome (black and white) mode for maximum performance and print cartridge life. AUTO will determine the mode the engine will go into based on the first page of a print job. If the first page is monochrome, the engine will go into mono mode until a color page is detected. It will then continue in color mode until the end of the job. If the first page is in color, the engine will go into color mode for the duration of the job. Select MOSTLY COLOR PAGES if nearly all of your print jobs are color with high page coverage. This will cause the engine to always run in color mode, even if the whole job is in monochrome. Select MOSTLY BLACK PAGES if you print mostly monochrome print jobs, or a combination of color and monochrome print jobs. This will cause the engine to switch back and forth between color and monochrome mode. If the first page is monochrome, the engine will go into mono mode until a color page is detected. It will then go into color mode. If 3 consecutive monochrome pages are detected, the engine will switch back to monochrome mode again. If the first page is color, the engine will go into color mode until 3 consecutive monochrome pages are detected, at which point it will switch back to monochrome mode again ENWW Configure device menu 41