HP Color LaserJet Enterprise MFP M681 User Guide - Page 145
Scan and send to network folder, Introduction, Scan and save the document to a folder, Folder Paths
View all HP Color LaserJet Enterprise MFP M681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Scan and send to network folder Introduction The printer can scan a file and save it in a shared folder on the network. Before using this feature, use the HP Embedded Web server to enable the feature and configure the shared folders. The system administrator can configure pre-defined Quick Sets folders; otherwise it is necessary to specify the folder path for each job. Scan and save the document to a folder NOTE: You might be required to sign in to the printer to use this feature. 1. Place the document face-down on the scanner glass, or place it face-up in the document feeder and adjust the paper guides to fit the size of the document. 2. From the Home screen on the printer control panel, select Scan, and then select Scan to Network Folder. 3. To specify a path for this job only, touch the Folder Paths text field to open a keyboard, and type the path to the folder, and then touch the Enter button. Use this format for the path: \\server\folder, where "server" is the name of the server that hosts the shared folder, and "folder" is the name of the shared folder. If the folder is nested inside other folders, complete all necessary segments of the path to reach the folder. For example: \\server\folder\folder Or, touch the Add a Path button that is below the Folder Paths field to select a pre-defined Quick Sets path or a path associated with a Contact. NOTE: The Folder Paths field might have a pre-defined path, and it might not be editable. In this situation, the administrator has configured this folder for common access. 4. Touch the File Name text field to open a keyboard, and then type the name for the file, and then touch the Enter button. 5. To configure settings for the document, touch the Options button. For example: ● Select File Type and Resolution to specify the type of file to create, the resolution, and the output quality. ● If the original document is printed on both sides, select Original Sides, and then select 2 Sided. 6. Set options marked with a yellow triangle before using the preview feature. NOTE: After the preview scan, these options are removed from the main Options list and are summarized in the Pre-scan Options list. To change any of these options, discard the preview and start over. Using the preview feature is optional. 7. Touch the right pane of the screen to preview the document. In the preview screen, use the buttons on the right of the screen to adjust the preview options and to rearrange, rotate, insert, or remove pages. ENWW Scan and send to network folder 131