HP Designjet H35000 HP Designjet H35000 and H45000 Printer Series - Release No - Page 13

Version 1.08 sheets using the Minimal method; or Full Measure on all loads, which always uses the method selected in Measure Media Type. Full Measure only on first load can increase the thoughput speed of multiple-copy print jobs when the media dimensions are known to be uniform. It is not recommended for jobs that require very precise placement of images relative to the edges of the media. (Menu > Printer Settings > Measure Media Type) For further information about Measure Media Types, refer to Chapter 3 of the User Manual. • NEW Head height added to the Media Wizard - the print head height off the media is now stored in the Media Wizard record for each media type. If the printer's current head height off the media is different from that stored in the Media Wizard for the selected media, the printer prompts you to change one or the other. • NEW Sleep/Wake menu option moved to Front Page - Enter Sleep Mode and Recover from Sleep Mode been removed from the Tools menu, and replaced with a Sleep/Wake key on the Front Page screen. The Sleep/Wake function otherwise works as before. • Media Reload - this feature now takes less time due to changes in how the edges and height of the media are detected. • Extra swaths to ensure complete curing - at the end of a print, the printhead carriage will continue moving past the print zone a few times with the lamps on to ensure complete curing. • Manual bidi calibration pattern improved - this pattern is now easier to read. The vertical reference marks are longer, so it is easier to see how the lines printed in each direction align with each other. • User Manual revised - the user manual has been revised to describe all software features through version 1.09. The current revision of the User Manual is Revision B. It can be downloaded from the ColorSpan web site (www.colorspan.com). Version 1.08 • NEW 3M™ Matched Component System (MCS™) option - this version supports the field conversion of the printer to use 3M ink and graphic media for the HP Designjet H35000/H45000 Printer series. Printed output from converted printers is covered by a 3M MCS Warranty. The field conversion requires a conversion kit, part number 0901583. 0706430 Revision M 13