HP Deskjet D1400 Photosmart Software Help - Page 63

Printer is stalled, If the printer still does not print, Document prints slowly, Start

Page 63 highlights

3. Click Stop, and then click Start to restart the print service. 4. Click OK to close the window. Printer is stalled If the printer stalls while printing a document, raise the printer cover, and then disconnect the power cable from the back of the printer. CAUTION: First, check for any loose or broken parts in the printer. If you find loose or broken parts, go to www.hp.com/support. If there are no loose or broken parts, follow these steps: 1. Check for and remove any obstacles, such as packing tape or materials, that prevent the print cartridges from moving back and forth. 2. Make sure the print cartridges are installed securely in the print cartridge cradle. For more information, see Installation instructions. 3. Make sure the tri-color print cartridge is installed in the left side of the cradle and the black print cartridge is installed in the right side of the cradle. 4. Check for and clear any paper jam. For more information, see Paper jam. 5. Lower the printer cover. 6. Connect the power cable to the back of the printer, and then turn on the printer. If the printer still does not print 1. Select the topic below that best describes the problem: • Paper jam • Out of paper message • Printer is stalled 2. If the printer still does not print, shut down, and then restart your computer. Document prints slowly Multiple software programs are open The computer resources are insufficient for the printer to print at its optimum speed. To increase printer speed, close all unnecessary software programs when printing. Complex documents, graphics, or photos are printing Documents containing graphics or photos print more slowly than text documents. Best or Maximum dpi print mode is selected The printer prints more slowly when Best or Maximum dpi is selected as the print quality. To increase the printer speed, select a different print quality mode. Document prints slowly 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

3.
Click
Stop
, and then click
Start
to restart the print service.
4.
Click
OK
to close the window.
Printer is stalled
If the printer stalls while printing a document, raise the printer cover, and then disconnect
the power cable from the back of the printer.
CAUTION:
First, check for any loose or broken parts in the printer. If you find loose
or broken parts, go to
www.hp.com/support
.
If there are no loose or broken parts, follow these steps:
1.
Check for and remove any obstacles, such as packing tape or materials, that prevent
the print cartridges from moving back and forth.
2.
Make sure the print cartridges are installed securely in the print cartridge cradle.
For more information, see
Installation instructions
.
3.
Make sure the tri-color print cartridge is installed in the left side of the cradle and the
black print cartridge is installed in the right side of the cradle.
4.
Check for and clear any paper jam.
For more information, see
Paper jam
.
5.
Lower the printer cover.
6.
Connect the power cable to the back of the printer, and then turn on the printer.
If the printer still does not print
1.
Select the topic below that best describes the problem:
Paper jam
Out of paper message
Printer is stalled
2.
If the printer still does not print, shut down, and then restart your computer.
Document prints slowly
Multiple software programs are open
The computer resources are insufficient for the printer to print at its optimum speed.
To increase printer speed, close all unnecessary software programs when printing.
Complex documents, graphics, or photos are printing
Documents containing graphics or photos print more slowly than text documents.
Best or Maximum dpi print mode is selected
The printer prints more slowly when Best or Maximum dpi is selected as the print quality.
To increase the printer speed, select a different print quality mode.
Document prints slowly
61