HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 40
Loosen the bottom cover, Remove the Phillips M2.0 × 4.0 screw from under each cover plug.
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Loosen the bottom cover: 1. Open the display to approximately 110° so there is slack in the cover where it wraps over the back of the computer. 2. Use a tool (1) to release the cover plugs from the inside of the cover on both ends of the computer, and then remove the plugs (2). 3. Remove the Phillips M2.0 × 4.0 screw from under each cover plug. 34 Chapter 5 Removal and replacement procedures for authorized service provider parts
Loosen the bottom cover:
1.
Open the display to approximately 110° so there is slack in the cover where it wraps over the back of the
computer.
2.
Use a tool
(1)
to release the cover plugs from the inside of the cover on both ends of the computer, and
then remove the plugs
(2)
.
3.
Remove the Phillips M2.0 × 4.0 screw from under each cover plug.
34
Chapter 5
Removal and replacement procedures for authorized service provider parts