HP Dragonfly Folio 13.5 Maintenance and Service Guide - Page 42
Remove the Phillips M1.4 × 1.2 screw, Remove the solid-state drive
View all HP Dragonfly Folio 13.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Table 5-2 Solid-state drive descriptions and part numbers (continued) Description 512 GB, PCIe-4 × 4, TLC 512 GB, PCIe-3 × 4, TLC 512 GB, PCIe-4 × 4, TLC, self-encrypting drive (SED) 256 GB, PCIe-4 × 4, TLC 256 GB, PCIe-4 × 4, TLC, self-encrypting drive (SED) Solid-state drive bracket (available in the Bracket Kit) Spare part number M17436-005 L85360-001 M52031-005 M52025-005 M52029-005 N22931-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 33). 2. Remove the bottom cover (see Bottom cover on page 33). 3. Disconnect the battery cable from the system board (see Battery on page 42). Remove the solid-state drive: 1. Remove the Phillips M1.4 × 1.2 screw (1) that secures the drive to the computer. 2. Pull the drive away from the socket to remove it (2). 36 Chapter 5 Removal and replacement procedures for authorized service provider parts