HP Dx5150 Computer Setup (F10) Utility Guide - Page 20

Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description PnP/PCI Configuration (continued) IRQ Resources • IRQ-3 assigned to • IRQ-4 assigned to • IRQ-5 assigned to • IRQ-7 assigned to • IRQ-10 assigned to • IRQ-11assigned to • IRQ-14assigned to • IRQ-15assigned to When resources are controlled manually, allows you to assign each system interrupt a type, depending on the type of device using the interrupt. Legacy ISA for devices compliant with the original PC AT bus specification, PCI/ISA PnP for devices compliant with the Plug and Play standard whether designed for PCI or ISA bus architecture. Assign IRQ for VGA Disables/enables capability of assigning IRQ for VGA. Assign IRQ for USB Disables/enables capability of assigning IRQ for USB. PC Health Status System Information Lists: • CPU Temperature • System Temperature • CPU Fan Speed • System Fan Speed System Fan Fail Check Disables/enables detection of fan failure during POST. Fan Control Sets fan speed control to auto or disables it. Load Optimized Defaults Allows you to reset Computer Setup to factory defaults. Set Supervisor Password Allows you to establish a password to control access to Computer Setup. Set User Password Allows you to establish a password to control access to the computer. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 14 www.hp.com Computer Setup (F10) Utility Guide