HP ENVY 13-ah0000 Maintenance and Service Guide - Page 47
The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly
View all HP ENVY 13-ah0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
3. Remove the discrete fan/heat sink assembly (3). NOTE: Steps 3 and 4 apply to computer models equipped with a graphics subsystem with UMA memory. See steps 1 and 2 for information for computer models equipped with a graphics subsystem with discrete memory. 4. Remove the four Phillips M2.0×6.3 captive screws (1) that secure the UMA fan/heat sink assembly to the system board. 5. Remove the UMA fan/heat sink assembly (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system board components each time the fan/heat sink assembly is removed. Replacement thermal material is included with the fan/heat sink assembly and system board spare part kits. Component replacement procedures 39