HP ENVY 13-ah0000 Maintenance and Service Guide - Page 55
that secure the display hinges to the keyboard/top cover
View all HP ENVY 13-ah0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3. Release the display webcam/microphone cable from the retention clips (3) and routing channels built into the keyboard/top cover. 4. Release the adhesive strip (4) that secures the display panel cable to the system board. 5. Release the ZIF connector (5) to which display panel cable is connected, and then disconnect the display panel cable cable from the system board. 6. Release the display panel cable from the retention clips (6) and routing channels built into the keyboard/ top cover. 7. Remove the three Phillips M2.5×6.7 screws (1) that secure the display hinges to the keyboard/top cover. 8. Swing the display hinges (2) up and back. 9. Lift the front edge of the keyboard/top cover (1) until it rests at an angle. Component replacement procedures 47