HP ENVY 13-ah0000 Maintenance and Service Guide - Page 51

TouchPad cable, Release the ZIF connector

Get HP ENVY 13-ah0000 PDF manuals and user guides View all HP ENVY 13-ah0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

TouchPad cable NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available using spare part number L19525-001. Before removing the TouchPad cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the TouchPad cable: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad. 3. Remove the TouchPad cable (3). Reverse this procedure to install the TouchPad cable. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
TouchPad cable
NOTE:
The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is available
using spare part number L19525-001.
Before removing the TouchPad cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
26
).
5.
Remove the battery (see
Battery
on page
28
).
Remove the TouchPad cable:
1.
Release the ZIF connector
(1)
to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the system board.
2.
Release the ZIF connector
(2)
to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the TouchPad.
3.
Remove the TouchPad cable
(3)
.
Reverse this procedure to install the TouchPad cable.
Component replacement procedures
43