HP ENVY 13-aq0000 Maintenance and Service Guide - Page 33
Bottom cover, Phillips M2.5 × 6.0 screws
![]() |
View all HP ENVY 13-aq0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Bottom cover Table 5-1 Bottom cover descriptions and part numbers Description Bottom cover for use in natural silver models Bottom cover for use in pale gold Spare part number L53359-001 L53360-001 Before removing the bottom cover, follow these steps: ▲ Prepare the computer for disassembly (Preparation for disassembly on page 24). Remove the bottom cover: 1. Remove the rubber feet from the bottom of the computer (1). NOTE: The rubber feet are available using spare part number L53398-001 for natural silver models and L53399-001 for pale gold models. 2. Remove the two Torx T5 2.0 × 4.0 screws (2) and the two Phillips M2.0 × 3.0 screws (3) that secure the bottom cover to the computer. 3. Remove the five Phillips M2.5 × 6.0 screws (4) that secure the bottom cover to the computer. 4. Use a non-marking, non-conductive tool to loosen the bottom cover from the computer (1). Component replacement procedures 25
![](/manual_guide/products/hewlettpackard-envy-13aq0000-maintenance-service-guide-db346ab/33.png)