HP ENVY 13-aq0000 Maintenance and Service Guide - Page 36
Solid-state drive, Remove the Phillips M2.0 × 3.0 screw
![]() |
View all HP ENVY 13-aq0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Solid-state drive Table 5-3 Solid-state drive descriptions and part numbers Description 1 TB, PCIe, value 512 GB, PCIe, with 32 GB Intel Optane Memory Module 512 GB, PCIe, value 512 GB, PCIe, TLC 256 GB, PCIe, TLC 256 GB, PCIe, value 128 GB, SATA-3, TLC Spare part number L53408-001 L54312-001 L53407-001 L53405-001 L53404-001 L53406-001 L53403-001 Before removing the solid-state drive, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 25). 3. Disconnect the battery (see Battery on page 27). Remove the solid-state drive module: ▲ Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2). Reverse this procedure to install the solid-state drive. 28 Chapter 5 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-envy-13aq0000-maintenance-service-guide-db346ab/36.png)