HP ENVY 13-ba0000 Maintenance and Service Guide - Page 58
System board, Mylar cover
![]() |
View all HP ENVY 13-ba0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
System board Table 5-9 System board descriptions and part numbers Description Spare part number System board including integrated Intel Core i7-1051 U processor and 16 GB of discrete graphics memory L94594-601 System board including integrated Intel Core i7-1051 U processor and 8 GB of discrete graphics memory L94593-601 System board including integrated Intel Core i7-1065 G7 processor and 8 GB of UMA graphics memory L94591-601 System board including integrated Intel Core i5-1021 U processor and 8 GB of discrete graphics memory L94592-601 System board including integrated Intel Core i5-1035 G4 processor and 8 GB of UMA graphics memory L94590-601 System board including integrated Intel Core i5-1035 G1 processor and 8 GB of UMA graphics memory L94589-601 Before removing the system board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 37). 2. Remove the bottom cover (see Bottom cover and rubber feet on page 38). 3. Remove the battery (see Battery on page 39). 4. Remove the solid-state drive (see Solid-state drive and Optane Memory Module on page 43). To remove the system board: 1. Disconnect the following cables from the system board. If necessary, pull back the Mylar cover to access specific cables. NOTE: On select products, the size and shape of the Mylar cover may vary from the illustration. (1) Mylar cover (2) Power connector cable (3) Camera cable (4) Display cable (5) Backlight cable (6) Keyboard cable (7) WLAN antenna cable (8) Fingerprint reader cable (9) Touchpad cable (10) Speaker cable 50 Chapter 5 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-envy-13ba0000-maintenance-service-guide-69367e6/58.png)