HP ENVY 13-ba0000 Maintenance and Service Guide - Page 67
and then release the camera cable, To release the camera cable from the camera connector
View all HP ENVY 13-ba0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
10. If it is necessary to remove or replace the camera, peel back the tape (1) and disconnect the camera cable from the connector (2). Locate the display cable locations (3). Use a plastic tool to pull the camera from the display panel cover (4), and then remove the camera (5). To release the camera cable from the camera connector, lift the release arm on the camera connector securing the camera cable to the connector (1), and then release the camera cable (2). Reverse this procedure to install the camera and the camera cable. The camera is available as spare part number L87982-001. Component replacement procedures 59
10.
If it is necessary to remove or replace the camera, peel back the tape
(1)
and disconnect the camera
cable from the connector
(2)
. Locate the display cable locations
(3)
. Use a plastic tool to pull the camera
from the display panel cover
(4)
, and then remove the camera
(5)
.
To release the camera cable from the camera connector, lift the release arm on the camera connector
securing the camera cable to the connector
(1)
, and then release the camera cable
(2)
.
Reverse this procedure to install the camera and the camera cable.
The camera is available as spare part number L87982-001.
Component replacement procedures
59